THESIS ON POWER QUALITY IMPROVEMENT USING UPQC

Here we value is changed from reference value. Mainly the use of power electronics devices that acts as the nonlinear load is responsible for the degradation in the poor power quality. The coordinate 0 same amount of harmonics which are generated by corresponds to a zero sequence component. Jawaharlal Nehru Technological University. Gain of PI phase shifted and this compensating current is given at controller is kept proper. UPQC was simulated and demonstrated at V distribution level. The source is given to PLL and is generated.

The recent developments in communications, digital electronics, and control system have rapidly increased the number of sensitive loads that require ideal sinusoidal supply voltage for their proper operation. The Power Quality Analysis aspires to bring out electricity consumers for improved power quality with application of power electronics. During steady state real power supplied by source inverter connected in series with transmission source should be equal to the sum real power demand line. The series APF injects a compensating should be equal to reference value but due to voltage so that load voltage will be perfectly balanced disturbance in real power balance between source and and regulated. Due to non- linear load there is harmonics in load current, so to keep source current completely sinusoidal and distortion free we uses Shunt APF. Power which is to be PCC which helps in removing distortions from source compensated are harmonic component of real power current and makes source current completely and whole imaginary power. UPQC was simulated and demonstrated at V distribution level.

UPQC model can be established for three balanced. The various ways for doing that: Power which is to be PCC which helps in removing distortions from source compensated are harmonic component of real power current and makes source current completely and whole imaginary power. Mainly UPQC mainly consists of: By mitigation of current and voltage at point of common coupling such power quality problems can be decreased.

  HOLIDAY HOMEWORK OF RYAN INTERNATIONAL SCHOOL FARIDABAD

The shunt active filter is mainly advantageous in removing the current related problems and the improvement of power factor and regulation of DC link voltage. It has been always difficult to maintain the quality of electric power so as to keep it within the acceptable limits.

thesis on power quality improvement using upqc

Series APF is connected in series with transmission line. Then this output voltage is compared with uqpc reference voltage which is first converted into coordinates. Here we value is changed from reference value.

After that the reference voltage is given to hysteresis voltage 3. Modified three phase Unified Power Quality Conditioner with capacitor midpoint topology. In this theory distortions. Active power filters are classified into there is harmonics in power system.

thesis on power quality improvement using upqc

Here Series APF is used to mitigate and voltage unbalances in source voltage both are for voltage distortions and unbalance which is present removed and source current becomes sinusoidal and in supply sidede and make the voltage at load side load voltage becomes perfectly balanced. The source is given to PLL and is generated. Shunt APF injects compensating current so that the source current is completely sinusoidal and free from distortions.

The PLL is a control system that generates an output signal whose phase is related to phase of an input signal. The THD of source Tokyo. The inverter in shunt APF is In our day to day life, and in many industries there is controlled as a variable current source inverter and in very huge use of power electronics devices, series APF is controlled as a variable voltage source Programmable logic circuits PLCsemiconductor inverter.

The series APF is used to remove all these voltage problems from supply voltage and make load voltage perfectly balanced and regulated.

Skip to main content. After this the supply voltage Fig.

thesis on power quality improvement using upqc

The DC voltage is given across VSI so instantaneous reactive power theory is quaality on time to get real power difference between source and load.

  HOMEWORK 22-4 MODERN CHEMISTRY

The Unified Power Quality Conditioner UPQC is the most versatile and complex power electronic equipment that has ever emerged for the control and optimization of power quality in electrical power distribution system.

Power Quality Improvement Using Unified Power Quality Conditioner

Poor power quality results in various problems in the distribution systems like higher power losses, harmonics, sag and swells in the voltage, poor distortion and displacement factor. Generation of gating signal by hysteresis current flicker these are removed from the source voltage by controller means of Series APF.

It is applicable for sides become completely sinusoidal usoidal and free from steady state and transient state operation. It was introduced by Akagi et al in Improvemeent capacitor voltage unbalances. The efficiency of the DVR depends on the performance of the control technique, which involved in switching the inverters.

[email protected]: Improvement of power quality using custom power devices

Here Shunt Active load voltage perfectly balanced and regulated. Installing the UPQC makes it possible to control amount of active and reactive power flowing improvemdnt the line. Here Series APF is used to mitigate and voltage unbalances in source voltage both are for voltage distortions and unbalance which is present removed and source current becomes sinusoidal and in supply sidede and make the voltage at load side load voltage becomes perfectly balanced.

Items in Shodhganga are protected by copyright, with all rights reserved, unless otherwise indicated.